Reset All
Reset All
|
{{TotalStartUpWatts}} Watts
Estimated StartUp Power Required
{{TotalContinuousWatts}} Watts
Estimated Continuous Power Required
| {{TotalWatts}} Watts | {{TotalBTU}} BTU/hr | Total System Power Required |
{{CurrentTabTitle}}
Heat to Raise
Copy Materials from StartUp
{{StartUpHTRPowerSummary}} Watts
{{ContinuousHTRPowerSummary}} Watts
Material #{{($index + 1)}} X
Material #{{($index + 1)}} ×
Add Material
Add Material
ResetReset Help
Heat to Melt
Copy Materials from StartUp
0 Watts
0 Watts
Material #{{($index + 1)}} ×
Material #{{($index + 1)}} ×
Add Material
Add Material
ResetReset Help
Conduction Heat Losses
Copy Materials from StartUp
0 Watts
0 Watts
Material #1 ×
Material #{{($index + 1)}} ×
Add Material
Add Material
Reset
Reset Help
Safety Factor
Safety factor is a subjective field to compensate for unknown heat losses or system inefficiency. Excess safety margin can drive up the overall cost of the system, while too low a value may limit system performance or cause inadequate thermal transfer. Click on Help below for specific Safety Factor recommendations.
Help
IMPORTANT: This Wattage Calculator is to assist you in understanding the power needs of electric thermal systems and components as they apply to various heating tasks. This Wattage Calculator is not a substitute for specific information related to complex and/or critical applications. When designing any thermal system, caution must always be exercised to comply with safety requirements, local and/or national electrical codes, agency standards, considerations for use in toxic or explosive environments and sound engineering practices. Integrity and suitability of any thermal system design/specification is ultimately the responsibility of those selecting and approving system components. If you require assistance with your calculations, please contact your local Watlow sales office or authorized distributor.